Page Title

Der Wiki wird derzeit überarbeitet: neue URL, neues Design, neue Inhalte!

Benutzer-Werkzeuge

Webseiten-Werkzeuge


mikeurban:menue:mouse_nodes

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
mikeurban:menue:mouse_nodes [2014/05/31 12:10]
thomas [MOUSE model data group]
mikeurban:menue:mouse_nodes [2016/05/10 16:12] (aktuell)
julian Seite von mikeurban:baustelle:editor_nodes nach mikeurban:menue:mouse_nodes verschoben und umbenannt
Zeile 5: Zeile 5:
 </​note>​ </​note>​
  
-The “Nodes and Structures” editor makes it possible to define the ele- ments used to model manholes, outlets and basins in a CS MOUSE storm and sewer collection system. ​+The “Nodes and Structures” editor makes it possible to define the elements ​used to model manholes, outlets and basins in a CS MOUSE storm and sewer collection system. ​
  
 The editor organizes the related input data into the following groups: ​ The editor organizes the related input data into the following groups: ​
Zeile 25: Zeile 25:
 Alternatively,​ it is possible to specify a sealed/​locked node (Cover type equal to '​Sealed'​),​ i.e. a node with a fixed lid on the top - at the ground level - so water cannot escape although the pressure still builds up inside. Alternatively,​ it is possible to specify a sealed/​locked node (Cover type equal to '​Sealed'​),​ i.e. a node with a fixed lid on the top - at the ground level - so water cannot escape although the pressure still builds up inside.
  
-On the other hand, a node can be specified as a '​spilling'​ node (Cover type equal to '​Spilling'​). In a spilling node, water escapes irreversibly from the model, if the water level reaches and exceeds the node's ground level (optionally set off by a '​buffer pressure level). The rate of spill is approxi- mated as a free overflow over the crest at a given level and with a "con- ceptual" crest length. For further details, see the MOUSE Pipe Flow Reference.+On the other hand, a node can be specified as a '​spilling'​ node (Cover type equal to '​Spilling'​). In a spilling node, water escapes irreversibly from the model, if the water level reaches and exceeds the node's ground level (optionally set off by a '​buffer pressure level). The rate of spill is approximated ​as a free overflow over the crest at a given level and with a "conceptual" crest length. For further details, see the MOUSE Pipe Flow Reference.
  
 If inflow to a node from catchments is limited this can be modelled by specifying the ‘Max. Inflow’ parameter for the specific node. It is possible to get the information about the volume held back at the node due to the inflow limitation by adding an entry in the ‘dhiapp.ini’ file. Please refer to the documentation on this file for further information. If inflow to a node from catchments is limited this can be modelled by specifying the ‘Max. Inflow’ parameter for the specific node. It is possible to get the information about the volume held back at the node due to the inflow limitation by adding an entry in the ‘dhiapp.ini’ file. Please refer to the documentation on this file for further information.
Zeile 39: Zeile 39:
 |Datasource ​ |Reference to an external data source (table ID) where the record has been imported from  |No  |DataSource ​ | |Datasource ​ |Reference to an external data source (table ID) where the record has been imported from  |No  |DataSource ​ |
 |Node ID  |A unique name for the node. Up to 40Y characters (letters, numbers, blank spaces and underscore characters) ​ |Yes  |MUID  | |Node ID  |A unique name for the node. Up to 40Y characters (letters, numbers, blank spaces and underscore characters) ​ |Yes  |MUID  |
-|Model ​ |Associates the current node to a spec- ified submodel ​ |No  |SubModelNo ​ |+|Model ​ |Associates the current node to a specified ​submodel ​ |No  |SubModelNo ​ |
 |Description ​ |User'​s descriptive information related to the node  |No  |Description ​ | |Description ​ |User'​s descriptive information related to the node  |No  |Description ​ |
-|PM Type  |Definition of the node´s role in the pressure main as the downstream point of the pressure main’s ​connec- tion to the network. Manholes and basins can be declared as a “Tail Node”. Please refer to the MOUSE Reference Manual (Pipe Flow) for further on pressure mains. ​ |Yes  |PMTypeNo ​ |+|PM Type  |Definition of the node´s role in the pressure main as the downstream point of the pressure main’s ​connection ​to the network. Manholes and basins can be declared as a “Tail Node”. Please refer to the MOUSE Reference Manual (Pipe Flow) for further on pressure mains. ​ |Yes  |PMTypeNo ​ |
 |Tail level  |Water level (absolute elevation) in the "​receiving node", used as lower boundary for permanently pressurized parts of the system. Please refer to the MOUSE Reference Manual (Pipe Flow) for further on pressure mains. ​ |Yes  |PMLevel ​ | |Tail level  |Water level (absolute elevation) in the "​receiving node", used as lower boundary for permanently pressurized parts of the system. Please refer to the MOUSE Reference Manual (Pipe Flow) for further on pressure mains. ​ |Yes  |PMLevel ​ |
 |Status ​ |Data status for the entire record, serves for keeping track on the source of information ​ |No  |Element_S ​ | |Status ​ |Data status for the entire record, serves for keeping track on the source of information ​ |No  |Element_S ​ |
mikeurban/menue/mouse_nodes.1401531012.txt.gz · Zuletzt geändert: 2014/05/31 12:10 von thomas