Page Title

Benutzer-Werkzeuge

Webseiten-Werkzeuge


mikeurban:setup:installation_2019_neuin2019

Neu in Release 2019 Update 1

Modul/Typ Neues Feature/Fehler Status
General MIKE URBAN is updated to ArcGIS 10.7 New Feature
General MIKE URBAN updated to support SWMM5.1.013 New Feature
MIKE 1D MIKE 1D gridded rain, dfs2 orientation in degrees used as radians Fixed
MIKE 1D does not read BRANCH_MIN_H_REL and BRANCH_MIN_H_ABS from dhiapp.ini Fixed
Volume available for pumping includes discharge from connected structures Fixed
Runtime stop criterion type "Filling degree" does not work with weirs/orifices/pumps in MIKE 1D Fixed
MIKE 1D ignores max-min timestep parameter in the joblist file of LTS calculation Fixed
Model Manager Simplification Wizard does not visualize new demand allocation connection lines correctly Fixed
Remove multiple results at one click in MIKE URBAN Longitudinal Profiles Fixed
Model Manager (EPANET) Simplification Wizard, demands not moved downstream when there are two or more demands connected to a junction. Fixed
CS-Pipe Flow Suffix “CatchmentDischarge” is added to the catchment MUID disabling MIKE1D from reading the information in Boundary Conditions Fixed
Model Manager (SWMM5) Example1 cannot complete simulation with latest SWMM5 engine version Fixed
Crash when trying to browse a file to import in a specific combination in the Import / Export wizard Fixed
Exception error when trying to import from specific inp file Fixed
Catchment Slope and Length: Exception error when clicking No in the Warning dialog Fixed
Model Manager Can't load specific MIKE 1D rainfall runoff result file Fixed
Path for Long profile is not fully controllable and wrong path is loaded Fixed
MU DFS2 support does not work with ArcGIS 10.6.1 Fixed
Model Manager (EPANET) Demand Statistic dialog does not have copy/paste options Fixed
Model Manager (MOUSE/MIKE1D) Curves and Relations Dialog, The third column 'As' is not hidden, appears in all curves that should only have two columns Fixed
CS-Pipe Flow (MIKE 1D) MIKE 1D merges the catchment ID and the linked boundary condition type into a single non existing MUID when aiming to run the RDI simulation - causing the simulation to stop Fixed
Cannot derive some results from MIKE 1D network calculation results *.res1d Fixed
Model Manager MU Project Check Tool does not check for duplicate node MUIDs Fixed
CS-Pipe Flow Error that MIKE URBAN loads a MIKE 1D result file as soon as a simulation is started, if the previous result file is stored in the same folder as the setup Fixed
Model Manager (EPANET) PID Control dialog - attributes missing in the "Tools / Customize / Custom Units", mw_PID Fixed
Model Manager (MIKE1D) Problems with MOUSE engine after upgrading a model from MIKE URBAN 2016 to MIKE URBAN 2017 Fixed
Model Manager Problem with SWQ Editor functionality with linking to specified Q-H relation specified in GUI Fixed
CS-Pipe Flow MIKE URBAN - UHM model result incorrect if simulation time shorter than lag time Fixed
Model Manager (EPANET) Option for user defined prefix for MUIDs when adding new features Fixed
Model Manager (SWMM5) Export of transect X and Z values are swapped Fixed
CS-Pipe Flow (MIKE 1D, LTS) MIKE 1D LTS: including AD statistics [Discharge_Load_Out] is ommitted from ERF file Fixed
CS-Pipe Flow (MIKE 1D, LTS) MIKE 1D LTS: statistics for AD components not related to event definition Fixed
CS-Pipe Flow (MIKE1D) MIKE 1D truncates RTCFunction.TSConnection1 Fixed
mdb template (Primary) should be exported to gdb template. Fixed
Model Manager Option for user defined prefix for MUIDS when adding new features. Fixed
Model Manager (SWMM5) Problem with loading result items Fixed
Model Manager (EPANET) The greyed out field beside diameter displaying "diameter - diameter - wall thickness" should be "diameter = diameter – 2 * wall thickness". Fixed
Model Manager (2D Flood) Changes to the SimulationID does not change the result filename for the .dfs2 in flood simulation causing overwrite of existing result files Fixed
Generate Fish Extent causes MIKE URBAN crash, if decimal separator is set to comma and not dot Fixed
Changing the Node ID does not cascade to changing the Node ID for the coupled cells Fixed
Model Manager Update of catchment parameters fails (msm_HModA) in the Import / Export tools Fixed
Model Manager (2D FLOOD) "Node Water Level" result list for MIKE 1D flood results viewed in MIKE URBAN incorrectly offers both node and M21 node levels Fixed
Model Manager Export to ISYBAU format is not working Fixed
Model Manager The volume graph for basin storage should be drawn based on calculating many points covering the range of the specified table Fixed
Model Manager (CS-Pipe Flow) MIKE URBAN and ECOLAB - editing built-in constants. The editor field "Global value" (attribute msm_EcolabCoeffvalue) should be disabled if msm_EcolabBuildInID <> -1, which means the values come directly from ECO Lab Fixed
Model Manager (CS-Pipe Flow) Improvement of the syntax in the LTS statistics result file ERF Fixed
Problem with MIKE1D engine writing LTS result file ERF in binary format Fixed
Model Manager (SWMM5) SWMM5 should support routing steps in decimals Fixed
Model Manager (CS-Pollution Transport) Catchment processing SWQ concentrations: the tool does not work for multiple components Fixed
Model Manager After MIKE 1D simulations, result files are not auto loaded Fixed
Model Manager (2D FLOOD) Error in 2D OverlandFlow Example with reading Band_1 in DEM.dfs2 Fixed
Model Manager (CS-Pipe Flow) Error in MIKE1D engine requiring a Q-H relation table having at least three entries specified – two entries is enough Fixed

Neu in MIKE URBAN Version 2019

Modul/Typ Neues Feature/Fehler Status
Import/Export Export to ISYBAU format is not working New Feature
Model Manager mdb template (Primary) should be exported to gdb template. Fixed
MU DFS2 support does not work with ArcGIS 10.6.1 Fixed
Option for user defined prefix for MUIDS when adding new features. New Feature
Path for Long profile is not fully controllable and wrong path is loaded Fixed
Remove multiple results at one click in MIKE URBAN Longitudinal Profiles Fixed
Model Manager Tools Simplification Wizard, demands not moved downstream when there are two or more demands connected to a junction. Fixed
Simplification Wizard does not visualize new demand allocation connection lines correctly Fixed
MU Project Check Tool does not check for duplicate node MUIDs Fixed
Collection System Curves and Relations Dialog, The third column 'As' is not hidden, appears in all curves that should only have two columns Fixed
MIKE URBAN - UHM model result incorrect if simulation time shorter than lag time Fixed
Problems with MOUSE engine after upgrading a model from MIKE URBAN 2016 to MIKE URBAN 2017 Fixed
The volume graph for basin storage should be drawn based on calculating many points covering the range of the specified table Fixed
Update of catchment parameters fails (msm_HModA) in the Import / Export tools Fixed
Problem with SWQ Editor functionality with linking to specified Q-H relation specified in GUI Fixed
Catchment processing SWQ concentrations: the tool does not work for multiple components Fixed
MIKE URBAN and ECOLAB - editing built-in constants. The editor field "Global value" (attribute msm_EcolabCoeffvalue) should be disabled if msm_EcolabBuildInID <> -1, which means the values come directly from ECO Lab Fixed
MIKE 1D Suffix “CatchmentDischarge” is added to the catchment MUID disabling MIKE1D from reading the information in Boundary Conditions Fixed
After MIKE 1D simulations, result files are not auto loaded Fixed
Can't load specific MIKE 1D rainfall runoff result file Fixed
MIKE 1D merges the catchment ID and the linked boundary condition type into a single non existing MUID when aiming to run the RDI simulation - causing the simulation to stop Fixed
Cannot derive some results from MIKE 1D network calculation results *.res1d Fixed
Error in MIKE1D engine requiring a Q-H relation table having at least three entries specified – two entries is enough Fixed
Error that MIKE URBAN loads a MIKE 1D result file as soon as a simulation is started, if the previous result file is stored in the same folder as the setup Fixed
MIKE 1D truncates RTCFunction.TSConnection1 Fixed
LTS Improvement of the syntax in the LTS statistics result file ERF Fixed
MIKE 1D LTS Including AD statistics [Discharge_Load_Out] is ommitted from ERF file Fixed
Problem with MIKE1D engine writing LTS result file ERF in binary format Fixed
Statistics for AD components not related to event definition Fixed
Water Distribution PID Control dialog - attributes missing in the "Tools | Customize | Custom Units", mw_PID Fixed
The greyed out field beside diameter displaying "diameter - diameter - wall thickness" should be "diameter = diameter – 2 * wall thickness". Fixed
EPANET Demand Statistic dialog does not have copy/paste options Fixed
Option for user defined prefix for MUIDs when adding new features Fixed
SWMM5 SWMM5 should support routing steps in decimals Fixed
Catchment Slope and Length: Exception error when clicking No in the Warning dialog Fixed
Crash when trying to browse a file to import in a specific combination in the Import / Export wizard Fixed
Example1 cannot complete simulation with latest SWMM5 engine version Fixed
Exception error when trying to import from specific inp file Fixed
Export of transect X and Z values are swapped Fixed
Problem with loading result items Fixed
2D FLOOD "Node Water Level" result list for MIKE 1D flood results viewed in MIKE URBAN incorrectly offers both node and M21 node levels Fixed
Changes to the SimulationID does not change the result filename for the .dfs2 in flood simulation causing overwrite of existing result files Fixed
Changing the Node ID does not cascade to changing the Node ID for the coupled cells Fixed
Error in 2D OverlandFlow Example with reading Band_1 in DEM.dfs2 Fixed
Generate Fish Extent causes MIKE URBAN crash, if decimal separator is set to comma and not dot Fixed
mikeurban/setup/installation_2019_neuin2019.txt · Zuletzt geändert: 2019/06/20 13:17 von thomask