Page Title

Der Wiki wird derzeit überarbeitet: neue URL, neues Design, neue Inhalte!

Benutzer-Werkzeuge

Webseiten-Werkzeuge


mikeplus:setup:installation_2022_neuin2022

Neu in MIKE+ 2022 inklusive Update 1

⯇ Zurück zu MIKE+

Auf dieser Seite beschreiben wir die wichtigsten Verbesserungen und Neuheiten von MIKE+ 2022 und dem dazugehörigen Update 1 (ohne Anspruch auf Vollständigkeit).

Angaben zu älteren Versionen finden Sie in der MIKE+ Versionsgeschichte.

Allgemeine Änderungen

Versionsmanager (Model Versions Comparison)

(Neu im Update 1)

Der Versionsmanager hilft dabei, das Modell in MIKE+ aktuell zu halten, in dem verschiedene Versionen miteinander verglichen werden. Somit ermöglicht diese neue Werkzeug eine Unterstützung, um die Übersicht zu bewahren und ein gezieltes Aktualisieren durchzuführen. Der Manger findet sich unter Werkzeuge (Tools) > Model Versions Comparison and Update.

In einem ersten Schritt werden zwei verschiedene Versionen (eines Modells) miteinander verglichen, unter Angabe eines Hauptmodells. ("Master version")

Mit Hilfe der Übersicht zu den Änderungen erkennt man auf den ersten Blick die Abweichungen und Unterschiede der ausgewählten Versionen.

Im letzten Schritt kann man dann entscheiden, wie mit diesen Abweichungen umgegangen werden soll.

Export von Karten- und Ergebnisdaten nach CAD

Ein Export von Karten- und Ergebnisdaten aus MIKE+ in die Formate .dwg und .dfx ist nun möglich. Sie können Kartendaten oder Längenschnitte per Mausklick exportieren.

Messwerkzeug

Mit dem Update auf MIKE+ 2022 wurde auf populären Kundenwunsch hin ein Messwerkzeug eingeführt.

Ergebnistabelle und Statistiken

In der Siedlungsentwässerung haben Sie die Möglichkeit, statistische Kennzahlen, wie Minima, Maxima oder Durchschnitte, sowie akkumulierte Werte zu berechnen. Sie können diese für Einzugsgebiete und Netzwerkresultate berechnen.

Zur besseren Ergebnisübersicht haben Sie mit dem release von MIKE+ 2022 die Möglichkeit, eine Tabelle zu erstellen. Es vereint Daten aus Ihren Modelldaten und den (statistischen) Resultaten. Diese Tabelle können Sie kopieren und sofort in Excel oder anderen Kalkulationsprogrammen verwenden.

Import - Zusammenfügen mehrerer Datenbanken

Beim Import von Daten in Ihr MIKE+ Projekt können Sie durch die Neuerungen im Automap-Tool mehrere Datenbanken automatisch zusammenführen.

Mit Hilfe des Import-/ Exporttools können Sie Datenbanken ab MIKE+ 2022 über die Asset-ID Daten aus verschiedenen Datenbanken Updaten. Zuvor war das nur über die MUID möglich.

Das Import-/ Exporttool ermöglicht es Ihnen mit dem Update, Punkte aus CAD-Blöcken zu importieren.

Modell- und Ergebnisbericht

Durch den Modell- und Ergebnisbericht haben Sie die Möglichkeit, aus den Daten der *.squlite, wie Asset-ID oder Beschreibung, und der *.res1d und anhängenden statistischen Berechnungen, eine Tabelle zu erstellen.

Vereinfachung Fließpfadanalyse

Sowohl in der Wasserversorgung, als auch in der Siedlungsentwässerung wurde die Fließpfadanalyse vereinfacht. Sie haben nun leichter die Möglichkeit, für Sie irrelevante Informationen bei der Analyse auszublenden.

Die Verbesserungen in der Ergebnisdarstellung führen dazu, dass Sie eine bessere Übersicht über Ihre Resultate erlangen, noch bevor Sie einen Output generieren. Zusätzlich wurden einige Bugs ausgemärzt.

Wasserversorgung

Neuorganisation von Zonen

(Neu im Update 1)

Bisher basierte die Zonenverteilung auf Auswahllisten, weshalb eine Aktualisierung schwierig und etwas umständlich war. Ab Version MIKE+ 2022.1 kann man sich jetzt aussuchen, ob die Zonenorgansiation auf Auswahllisten oder den Netzinformationen basiert. Somit kann man die Zoneninformation in die Editoren importieren und direkt verwenden.

Auch in der Bedarfsstatistik kann man nun den Zonenbedarf einsehen.

EPANET MSX (Multi-Species eXtension)

(Neu im Update 1)

Dieses neue Spezialwerkzeug ist eine Erweiterung zur Berechnung der Wasserqualität. Damit können auch verschiedene, aufeinander reagierende chemische Stoffe abgebildet werden. Beispielsweise kann damit der Bakterieller Zuwachs bei gleichzeitiger Behandlung mit Chlor modelliert werden.

Weitere Neuerungen in der Wasserversorgung

  • Online Analyse: MIKE+ Daten können zu einem SCADA Kontrollsystem hinzugefügt werden. Das Werkzeug ist für die Analysemöglichkeiten unseres verbesserten Waternet Advisors ausgelegt. Die Daten werden über ein Online-Analyse Tool eingefügt.
  • Pumpen- und Ventiloptimierung: Das neue Analysetool zur Pumpen- und Ventiloptimierung erlaubt Ihnen, den idealen Betriebszustand zu ermitteln. Durch diese Neuerung können in weiterer Folge Einsparungs- oder Energieoptimierungspotentiale ermittelt werden.
  • Eine weitere Neuerung in MIKE+ 2022 gibt Ihnen die Möglichkeit, den Energieverbrauch, Kostenanalysen oder die CO2 Äquivalente der Betriebszustände zu analysieren.

Siedlungsentwässerung

Vergleichen von Ergebnissen

Sie haben ein Stand-Alone Werkzeug zur Verfügung, das es Ihnen ermöglicht, Varianten eines Modells direkt mit einander zu vergleichen. Über die Befehlszeile finden Sie das Tool Result Verification:

Sie können das Werkzeug für Variantenstudien einsetzen oder alte Modelle mit Ihren Berechnungen in MIKE+ 2022 vergleichen. Eine weitere Einsatzmöglichkeit bietet sich mit dem Vergleich von verschiedenen Netzdaten nach einem Update an. Das Werkzeug informiert Sie automatisch über grobe Differenzen zwischen Ihren Varianten.

Eine Visualisierung und ein Vergleich der Ergebnisse von alten Modellen und neuen Modellen ist durch ein neues Asset Management System ​möglich.

2D Überflutungen

  • Kopplung von Advektions-Dispersions Berechnung 1D mit 2D
  • MIKE ZERO Launch: Simulationen sind nun über MIKE ZERO Launch möglich und erlauben Ihnen so, neben einer laufenden Simulation den Model Manager frei zu halten. Somit können Sie den Model Manager trotz laufender Simulation auf einem anderen Endgerät verwenden.
  • Fließgewässer Import: Sie können nun Daten aus MIKE HYDRO River, MIKE 11 und Oracle Spatial importieren.

MIKE+ 2022 Update 1 Release Notes

New Features

Modul/Typ Neues Feature
General A new account management has been added, to use MIKE Cloud services. Once signed into MIKE Cloud using the 'Sign on' button at the right end of the title bar, new functionalities become visible in the ribbon, to run simulations with the Simulation Launcher (see description below) or to create a domain file in Mesh Builder for the 2D overland module. Signing into MIKE Cloud requires a valid user account. If you do not have a MIKE Cloud account, reach out to your local DHI sales representative.
General A new 'Versions Management' tool has been introduced, which is designed to support a cost- effective model maintenance. The tool can identify, report and visualize differences between any two versions of a model setup, as well as it can automatically update any model with the identified differences. Additionally, the Versions Management tool facilitates the organization of various model versions into a tree-like dependency structure that reflects the actual models' mutual relations and evolution. The tool is accessible from the Tools' ribbon tab.
General The usage of user-defined columns in the editors has been improved. It is possible to populate them using the 'Interpolation and assignment' tool and to use them to create selections using the 'Select by attribute' tool. The content of user-defined columns can now also be used as label on the map to create customised labels, and to control the layer's symbology.
General In the 'Import and export' tool, the user is now notified when imported data are identified to be in a different map projection than the one used in MIKE+, and is now offered the choice between reprojecting the data to the same map projection as used in MIKE+, or keeping the coordinates of imported data unchanged. This is especially useful when the two map projections are considered to be the same although minor differences are identified in their properties, in which case the data should not be reprojected.
General A new 'Save as default' button has been added to the profile plot window. It is used to save the current list of layers and their symbology to the current MIKE+ project, for use as default layout for the future profile plots. It saves the settings for the model layers as well as for the result layers loaded on the plot.
General When exporting a profile plot to a CAD file, the font size in the CAD file is now uniform and controlled by the user during the export.
General When adding a CAD file to the map, the text layers from the CAD files are now also visible.
General A new template has been added in the 'Model and result report' tool, to make a join table with results.
Collection System A new tool 'Snap neighboring catchments' has been introduced, which updates the geometry of catchments on the map, to ensure that neighboring catchments are correctly snapped. It is especially useful to prepare catchments before attempting to merge them with the 'Network simplification' tool, because distant catchments cannot be merged even if the distance between them is négligeable. The 'Snap Neighboring Catchments' tool is accessed via the 'Special tools' menu on the Catchments ribbon tab.
Collection System GeoTIFF rasters can now be used as input DEM in the 'Catchment slope and length' and 'CRS generation' tools.
Collection System and Rivers The list of Simulation parameters available in the 'MIKE 1D engine configuration' dialog has been improved. For relevant parameters, a different value can now be used for the collection system network and for the river network.
Rivers New types of boundary conditions have been added, respectively for rainfall, evaporation and wind friction applied to the water surface of the 1D network.
Rivers A new 'Storage' feature is available for river networks, to describe reservoirs, basins or any type of storage area using a single calculation point.
Rivers A tool 'Compute storage from DEM' has been introduced, to compute the capacity of storage points. It uses a DEM to compute the Elevation-Area relationship of the storage, within the polygon shape of the storage points.
Rivers A new 'Data Assimilation' module is available for river models. It allows continuous processing and updating of model states during simulations. Data assimilation is used for many types of applications, but in particular for real-time forecasting where the forecasted values of network state conditions (water levels, flows, etc.) are much more accurate and reliable when update and error estimation are included. In this version, the 'Data Assimilation' module only supports updating using a weighting function method.
Rivers A new '2D map' type of result file is available for use in simulations of open channels. This result type provides interpolated results from the MIKE 1D simulation on a 2D rectangular grid file.
Rivers The automatic import of MIKE HYDRO River and MIKE FLOOD model setups has been improved. It especially corrects the River IDs so that they use the same case in the Cross sections editor, in the Rivers editor, and in the 1D-2D couplings editor, which is a requirement in MIKE+. It also improves the import of side structures from MIKE HYDRO River, which are converted to Structure links.
2D overland The MIKE ECO Lab module, used to simulate water quality processes, is now also supported by 2D overland simulations. Couplings between MIKE ECO Lab state variables used by the 1D and the 2D simulations are also supported.
2D overland A new filter has been added for 2D overland result files, to control whether the file should store results in all elements from the 2D domain, only in real wet areas, or only in wet areas.
2D overland The 'Interpolation and assignment' tool can now make use of .mesh and .dfsu layers to assign values to an attribute in the database.
2D overland In the 'Coordinate system' editor, it is now possible to select the same coordinate system as the one used in a MIKE HYDRO, MIKE 21 or MIKE FLOOD file, using the 'Select file’ button.
2D overland In the '1D-2D couplings' editor, a new "arrow" button has been added to pick the ID of the coupled item from the map.
2D overland The 'Create couplings' tool has been improved to specify the inlet area of the coupling to SWMM nodes.
2D overland The Grd2Mike tool from the MIKE Zero toolbox has been updated to allow the specification of item details and land value.
2D overland Advance notice of end of support for ‘Maxwell’ and ‘Kepler’ type NVIDIA GPU cards. The 2023 Release of MIKE+ utilising GPU acceleration will require NVIDIA graphics cards with compute capability 6.0 or higher. Accordingly
2D overland Neuer Ergebnistyp "Still water depth". Bedeutung?
General The Simulation Launcher is a new tool for execution of simulations in the cloud. It offers a credit-based solution to run simulations on different types of virtual machines with the option to automatically download results locally at the end of the simulation, all from within MIKE+. Supported simulations are 1D, 2D and coupled 1D-2D simulations from the working mode 'Rivers, collection system and overland flows'. The tool is accessible from the 'Run in MIKE Cloud' button in the 'Simulation' ribbon tab, once the user is signed into MIKE Cloud.
Water Distribution A new 'Multi-species analysis' has been introduced, to run multi-species water quality simulations based on the EPANET MSX engine. It is accessible from the 'Model type' editor.
Water Distribution The usage of Zones has been improved. Two different types of zones are now available: zones based on a selection for which the items included in the zones are populated in a list/ selection, and zones based on network properties which are defined by the 'Zone ID' field in the network items. The list of network zones is automatically synchronized with the definition of the network items.
Water Distribution A new Special selection called 'Nodes connected to selected point constituent sources' has been added to the Map ribbon tab.
SWMM A new tool 'Transfer SWMM data to MIKE 1D' has been introduced. It is used to convert data from SWMM tables in the MIKE+ database to MIKE 1D tables, and therefore ease the conversion of SWMM model setups for use with the MIKE 1D engine. The tool is accessible from the list of special tools in the 'CS network' ribbon tab.
General / Results visualization The button 'TS from map', used to pick locations on the map for time series plots, can now be used also on extra result maps, and not only on the model map.
MIKE 1D engine Enabled using SWMM .out format as input to MIKE 1D network simulation (TT57945).
MIKE 1D engine New tool to support conversion of MOUSE .erf format to .res1 D (TT60422).
MIKE 1D engine Made improvements to enable consistent results when running simulations on multiple threads.
MIKE 1D engine Enabled catchment connections to river junction nodes (TT58984).

Fixed issues

Modul/Typ Fehler
General Using the Transfer to map' button in the Selection Manager, some items from the selection did not remain selected on the map and in the editors.
General When export results, the 'Import and export' tool sometimes failed to export the 'TsValue' field containing the result value.
General The 'TsValue' attribute was not available in the expression editor, from the 'Import and export' tool.
General In the profile plot exported to CAD file, some texts were missing in the table when they did not fit in their cell. The text wrapping has been improved to avoid this.
General Some tools processing a DEM, including the 'Interpolation and assignment' and 'Create and update transects' tools, failed to assign a correct elevation value when the DEM was defined with a map projection in US units.
General Background maps were not properly located when working with some map projections defined in US units.
General Raster text files added to the map were sometimes shifted by half the cell size.
General In the 'Import and export' tool, the 'Target preview' did not work when importing data from a geodatabase.
General Instantaneous results shown in result tables were not showing the same time step as in other result windows.
General When working with a scenario (other than the Base one), the name of the active alternative is now shown in the editors' tab name.
General Under some circumstances, special characters were not correctly handled during import using the 'Import and export' tool.
General When running a batch simulation, result files previously loaded on the map were not refreshed.
General The 'Identify' button has been improved to also query elevations from rasters loaded on the map.
General Running the 'Import and export' tool from a command line did not execute the repair process, as it does when executed from the user interface.
General Creating a new time series from the Tools' ribbon tab did not offer the options to import data from raw data files.
General Additional file extensions for world files, used to georeference image files, are now supported.
General A new search field has been added to the 'Select by attribute' tool, to search amongst the list of unique values.
General Various unexpected errors in pop-up windows have been fixed.
Collection System The 'Boundary conditions' table was missing in the 'Select by attribute' tool.
Collection System An incorrect unit was used during the rainfall-runoff simulation for the "constant degree day" coefficient, used for the snowmelt option in the RDI method.
Collection System The 'Network simplification' tool changed the geometry of catchments to a rectangle, when attempting to merge distant catchments. Distant catchments are no longer merged (the new tool 'Snap neighboring catchments' can be used beforehand to snap catchments with small distances in-between, so that they can later be merged).
Collection System The water level was sometimes not filled on profile plots, at locations with parallel pipes.
Collection System In the 'Load points' editor, "Units" has been renamed to "Person equivalents" for clarity.
Collection System The option to allow multiple tail nodes on pressure reaches, in the 'MIKE 1D engine configuration' dialog, did not work.
Collection System While importing model setups from MIKE URBAN, the stop levels were not imported correctly in control rules for pumps.
Collection System A wrong water level was sometimes plotted on profile plots for links defined with a generic shape of type 'HW Open'
Collection System The option to specify the Preissmann slot ratio was disabled for closed cross sections.
Collection System When using the 'Identify' button on a result map to display link data, the 'UpLevel' and 'DownLevel' were not displayed if no model database was opened.
Collection System Control rules were still active in the simulations when 'Controlled by control rules' was unticked, in case the 'Apply' option was selected for the control rule. Control rules are now inactive if one of the two check boxes is unselected.
Collection System When showing results from a 'LTS extreme statistics' result file in the 'Property and result explorer' panel, the time of the maximum result value was shown in accumulated seconds. It is now showing the corresponding date.
Collection System The 'Reverse links' tool now offers the option to also reverse user-specified invert levels.
Collection System In the 'LTS global parameters' editor, the dtQV attribute was not used during the calculation.
Collection System Selection tools on the map used to select features even for layers being switched off. They now select features from visible layers only.
Collection System The maximum speed of Valves was incorrectly showing a unit in % instead of %/seconds, and their minimum and maximum openings were showing a unit in % instead of fraction.
Collection System Water age results were presented in seconds. They are now presented in hours.
Collection System A rainfall boundary condition applied to "All" catchments was also applied to the water surface of the open channels from the network. This catchment boundary condition now applies only to catchments, whereas a new independent boundary condition type has been introduced for the rainfall on open channels.
Collection System In the 'Catchment connections' editor, the catchment load allocations were incorrectly set after merging catchments with the 'Network simplification' tool.
Collection System PID set point values were wrongly converted during the import from MIKE URBAN for projects defined in US units, when no conversion was expected.
Collection System During Sediment Transport simulations, 'Dimensionless bed shear stress' result item was not saved to result files even when selected.
Collection System The pipe top level was not shown in profile plots, after customizing the unit of the pipe diameter.
Collection System Control rules settings for Valves were not correctly imported from MIKE URBAN.
Collection System In the 'Curves and relations' editor, the volume computed for 'Basin geometry' curves was shown in SI units when the project was using a US unit system.
Collection System and Rivers The Validation' menu in the Setup tree view has been replaced by a 'Validate' button in the 'Simulation setup's editor, for more clarity.
Collection System and Rivers The default number of threads used for MIKE 1D simulations was usually twice the value shown in the 'Parallelisation configuration' dialog.
Rivers Several corrections have been made to the import of river models from MIKE HYDRO River and MIKE 11.
Rivers Rivers were shown in the wrong direction on profile plots, when rivers are defined with a negative flow direction.
Rivers The MIKE+ database saved the path to the cross sections file as an absolute path, and this path became invalid when moving MIKE+ project files.
2D overland Time series extracted from 2D result files were always shown in SI units, even when the project was defined to use US units.
2D overland Several corrections have been made to the import of 2D models and couplings from MIKE 21 and MIKE FLOOD.
2D overland The 'Set max. time' button in the 'Simulation setups' editor failed to work with 2D boundary conditions.
2D overland The 'ArcGIS integration' tool did not export AD result items from 2D result files.
2D overland While editing mesh arcs on the map, the edited arc could not snap to other arcs to create polygons.
2D overland When changing the map projection of the MIKE+ project and reprojecting model data, the 2D domain file was deleted.
2D overland The '2D boundary conditions' and '2D infiltration' editors did not report an error when the time series file is missing.
2D overland When using a rectangular grid domain, the 'Create couplings' tool has been improved to not create couplings to nodes located on 'Land value' cells, when the option ‘Couple items located within extent of 2D domain only' is selected.
2D overland Result items 'Discharge to surface' and 'Water level of couped model' were not loaded in MIKE+ for couplings between a CS weir and the 2D domain.
2D overland The creation of a 2D Surface Roughness file was very slow when pressing the button 'Review roughness file on map'.
2D overland When the 2D domain file is created from MIKE+ definition, this file was re-created and saved every time the MIKE+ project was saved. This file is now saved again only if it has changed.
2D overland The number of threads and subdomains used for 2D simulations was different than selected in the 'Parallelisation configuration' dialog.
2D overland The 'Import and export' tool failed to import couplings' geometry from shape files, with the error "Well-known text is not valid".
2D overland The '2D surface roughness' editor accepted dfs2/dfsu input files containing data with Manning's n values, whereas only Manning's M values are supported during the simulation.
Water Distribution Wrong results were sometimes reported from optimization simulations in the .csv file, although the optimisation ran correctly.
Water Distribution For fire flow simulations based on pressure zones, wrong junctions from other zones were sometimes taken into account, and no fire flow was calculated.
Water Distribution Option 'Assignment from network neighbours' in the 'Assignment and interpolation' tool sometimes failed with WD networks.
Water Distribution Valves regulation was incorrect, when the timing of the control rule was not defined in hours.
Water Distribution Construction year (CDATE) attribute from Pipes table was not listed in the 'Select by attribute' tool.
Water Distribution When a pipe was split from the map, its user-defined length (if any) was not updated, resulting in a doubled total length.
Water Distribution Wrong Flushing Analysis results were obtained when the decimal separator was a comma in the Windows regional settings.
Water Distribution The nodal demand was not correctly accounted for in the fire flow simulation, with residual pressure for given flow and flow for given residual pressure methods.
Water Distribution The flow unit used for results presentation was sometimes inconsistent with the unit system selected for the project.
Water Distribution Inactive elements (pipes, pumps, etc.) were hidden on the map. They are now shown with a grey line.
Water Distribution Some demands and time patterns were missing after merging model setups using the 'Submodel Manager1.
SWMM Raingage coordinates were not exported to the inp file for all simulations.
SWMM Buttons View log' and View summary', from the Simulation tab in the ribbon, failed to show the files from SWMM simulations.
SWMM From the 'Layers and symbols' tree view, the 'Zoom to layer' option did not work for SWMM layers.
SWMM In the 'Curves and relations' editor, the head values for 'Pump curve 3 (Head-Flow)' curves with US units were shown in inches instead of feet.
SWMM In the 'Time series' editor, the plot sometimes failed to show the correct X-axis values, when the time series was defined with a relative time.
SWMM It was not possible to customise the units used by SWMM-specific attributes in the 'Catchments' editor.
SWMM The ground slope in the 'Catchments' editor was wrongly showing a unit of o/oo instead of %.
MIKE 1D Engine Fixed error reading rain time series for LIDS (TT59912)
MIKE 1D Engine Fixed unhandled exception error when running UHM hydrograph (TT60752)
MIKE 1D Engine Corrected counting of events in annual/monthly statistics due to inconsistent application of time interval between jobs (TT60613)
MIKE 1D Engine Enabled running LTS Simulation if there is a blank character in a Job list criteria ID (TT60816)
MIKE 1D Engine Corrected errors occurring when using reduced result files (TT60634)
MIKE 1D Engine Enabled river - CS connection to orifice (TT60163)
MIKE 1D engine Enabled saving water level results at nodes (TT60156)
MIKE 1D engine Enabled simulating closed cross sections with Manning relative resistance (TT59119)
MIKE 1D engine Fixed bugs related to running long-term urban simulations (TT59281, 54268, 55018, 57387, 57978,58294, 58316, 58847, 58199, 59200, 59201,59281,59036)
MIKE 1D engine Enabled running sediment transport using initial sediment depths (TT59610).

MIKE+ 2022 Release Notes

New Features

Modul/Typ Neues Feature
General SWMM model networks can now be coupeld to a 2D overland model. In this version, couplings to the 2D model are only available with nodes, and coupling of water quality components is not supported
General Map data from MIKE+ can now be exported to CAD files (.dwg and .dxf formats), using the import and export tool.
General Longitudiunal profile plots can be now exported to CAD files (.dwg format).
General From the "Import and Export" tool, it is now possible to import data from an Oracle spatial database-
General Connecting to a WMS server to display background layers now allow connecting through a proxy server
General A new "Measure" tool is avialable in the ribbon bar, in the Map tab. It allows measuring distances on the map along segments or plylines, as well as polygons' areas.
General The "Export map" button has been added to the ribbon, in the Map-tab. It can be used to save the map layout to an image file.
General The "Import and Export" tool can be executed from a command line, reading the import/export configuration from a configuration file.
General A new "Automap" button has been added to the "Import and Export" tool. When importing data from MIKE+ projects to an other MIKE+ project, this button will create all sections corresponding to all relevant tables in the MIKE+ database for the active working mode and will populate them with the proper assignments. Duplicates will be renamed.
General In the "Import and Export" tool, a new job property called "Source text format" has been added. This option applies when converting input strings (texts) to numbers, and controls how the decimal seperator is identified.
General A new function called DoubleFromString has been added to the Expression editor, to convert input string (text) data to numerical values and controlling the format of the decimal seperator in the input text. It can be e.g. be used in the "Field calculator" or the "Import and Export" tool.
General The date and time of results shown in the "Property and result explorer is now synchronised with the date and time of results shown on the map.
General It is now possible to export simulation files and run simulations from a command line also for Water Distribution and SWMM model types.
General The tool "Clone and repair database", available in the File menue, may be used with damaged and corrupt databases. It will create a new database but without the damaged tables, which can be then populated again manually.
General A default unit system can now be selected from the "User preferences dialog, to choose between SI and US unit systems. It will especially control in which unit system the results are shown, when no model database is opened.
General In the "Model and result report" tool "Joins" can now merge data from model tables and results in a common table of the report. A new "Time step" option also allows adding a column to the join table, with results from a selected time step.
General In "Rivers, collection systems and overland flows" mode, closing MIKE+ while a simulation is running will offer an option to continue the simulation outside of the MIKE+ application. This option can be used to release the license module of the user interface while running a simulation.
Collection System and Rivers A new "Statistics" content type can be selected for catchments and network result files. This type of result file stores max / min / average values and time of max/ min value, as well as accumulated values for the relevant result items, computed throughout the simulation. These statistics are computed during the simulation and therefore do not depend on a storing frequency of the results.
Collection System A new "Results differences" tool is available in the "Results" tab in the ribbon. This tool is designed for comparing results from different variants of hydraulic network simulations, and report any significant difference of result. This may e. g. be used when comparing results from a former version of a model and results from a new version updated with the latest information from an asset management system. The tool allows you to quickly identify locations where results differences are observed, and visualise and vompare results at these locations. It is not necessary to have a model database opened for using the tool.
Collection System An "initial level" can now be specified in the weir's and orifices' properties, to control the elevation of structures controlled by control rules at the start of the simulation.
Rivers Several new types of structures are now available for river networks: Pumps, Bridge structures, Dambrakes, Tabulated structures, and user-defined Energy losses.
Rivers River models previously created with MIKE HYDRO River or MIKE 11 can now be imported automatically into MIKE+, from the File\ Import menu. Please note that the import is limited to the river functionalities currently supported in MIKE+ (mainly the river and catchments definitions as well as structures and boundary conditions), whereas some functionalities remain unsupported for now in MIKE+ and are ignored during the import (e. g. storages, multiple zone resistance and time-varying resistance factors, variables, side structures, etc.). Before importing a river model, make sure that all expected river functionalities are available in MIKE+ and check for possible warnings in the Log after the import.
2D overland Improved performance for 2D overland applications using GPU acceleration: Tuning of timings and numerous small tweaks, OpenMP parallelization for pre-processing of infrastructure, Pre-processing of boundary conditions (initialization), Optimised data transfer on 2D flood statistics results; In addition a new dynamic list approach is used together with optimised gradient calculation for forcing calculations.
2D overland Coupling of Advection- Dispersion components is now possible also when coupling the 1D network to a MIKE 21 FM or MIKE 3 FM file.
SWMM The "Topology Repair" tool is now also available for SWMM model networks.
Water Distribution A new "optimisation" special analysis has been added. It is used to optimise pumps and valves' behavior to meet e. g. target water depth, pressure or flow in the network.
Water Distribution A new "Online analysis" special analysis has been added. It is used to map the model data from MIKE+ to SCADA system's data, especially for use in Water Distribution Online.
Water Distribution The "Pipe Criticality" special analysis has been renamed §Network vulnerability", and now also reports criteria related to nodes.
Water Distribution In interactive fire flow analyses, a new "Free discharge hydrant" method has been added, which computes both hydrant discharge and residual pressure for a free discharge hydrant.
Water Distribution Extra result items "Tap pressure" and "Demand allocations pressure" are now saved during simulations.
Water Distribution Extra result items related to pumps are saved during simulations: efficiency, energy costs and energy. These items are saved only when the simulation is performed using the EPANET 2.2 engine version.
MIKE 1D Engine Added static volume output to Pump Emergency Storage calculations (TT59012).

Fixed issues

Modul/Typ Fehler
General User-defined columns were not exported, when a feature layer was exported to a shape file.
General An unexpected error "Unable to open database file. x64 is True" was obtained when running a simulation from a MIKE+ project saved on a network location (other than the local machine).
General Colours on extra result maps could be inconsistent with the defined colour palette, when multiple result layers (from multiple result files) were added to the same map.
General In the Profile plot properties, it was not allowerd to apply negative values to control the minimum and maximum values along the right Y-axis.
General An unexpected error sometimes occured when loading the symbology for a shape file from a file.
General RDI additional result items were not saved to result files.
General An unexpected error about a non-existing source was provided in the "Import and Export" tool when trying to export a result layer to e. g. shape file.
General When loading a .dfs0 time series in the list of result files, the "Time period to load" was ignored and the entire time series was always loaded.
General Values imported from the "import and Export" tool were wrongly altered in some cases, when the decimal separator in the source file was a comma.
General Shape files exported from a model with a coordinate system with length unit in feet were defined with inconsistent coordinates and units.
General Various errors preventing from showing background maps from some WMS servers have been corrected.
General An error preventing from displaying a Google Map or Open Street Map background layer for some map projections, when the projection's false origin is defined exactly at the border of the valid region.
General When exporting a feature layer to a shape file, the feature name was always appended as a suffix. It is now appended only when multiple shape files are exported for the same feature layer.
General Flow tracing from results was wrong when the flow in the first pipe was smaller than the threshold value.
General When activating the option "Show columns in active tab" from the context menu of overview grids, several columns from the active tab were not shown.
General An unexpected error occurred when using time series with a non-equidistant time axis in the "Plots and statistics" editor.
Collection System in the Initial conditions editor, data in the table of local values were deleted when the set of the initial conditions was renamed.
Collection System Various improvements and corrections to the validation of data from the VS network and catchments have been made.
Collection System Attributes "Description" and "Asset Name" failed to import from MIKE URBAN classic, for the catchments table.
Collection System An unexpected error was sometimes onbtained when computing the Distributed weights for grid distributed rainfall boundary conditions.
Collection System Attributes "NetTypeNo" and "Element_S" were missing in the list of domains when applying the Field calculator in "Pipes and canals" editor.
Collection System MIKE+ did not allow defining aboundary condition in a soakaway node.
Collection System An unexpected error "Found non-noded intersection" was sometimes obtained when trying to merge catchments with the Network simplification tool.
Collection System Wrong validation errors were reported in the Expression editor when using a sensor with type "Action Active Time", because it was wrongly considering it as a double value.
Rivers Rivers imported from shape files were always given a chainage length of 100 m, regardless of the actual length of the imported lines.
Rivers An unexpected error occurred when exporting cross sections to shape file.
Rivers From the "Measurement stations" editor, using the arrow button to pick a river location from the map did not pick the chainage location along the river from the clicked location.
2D overland MIKE+ did not provide the expected warning message when the generation of the mesh failed.
2D overland The "Apply" option for 2D boundary conditions was ignored, making the boundary conditions always active.
2D overland Various errors occurring when importing a MIKE 21 and/or MIKE FLOOD file into MIKE+ have been fixed.
2D overland Coordinates of the 2D domain's extent were wrongly converted between feet and meters during import from MIKE URBAN classic.
2D overland Attributes from 2D overland editors could not be selected as target in the "Interpolation and assignment" tool.
2D overland The coupling tools "Create couplings" and "Edit location" were wrongly disabled when coupling the 2D overland module to a MIKE HYDRO River file.
2D overland MIKE+ failed saving the "Roughness value" and "Infiltrated volume" result items in 2D result filed when selected.
2D overland It is now possible to filter the list in the "1D-2D couplings" editor by coupling type.
2D overland When several 2D boundary conditions had the same code value (i. e. defining a discontinuous boundary condition), only the first part was displayed on the map.
2D overland Simulations failed when including a1D-2D coupling to a soakaway node, due to an unexpected error claiming the node type was incorrect.
2D overland The list "Couple to" was missing in the "1D-2D couplings" editor, when computing to an existing MIKE 21 file instead of the 2D overland module.
SWMM "Asset ID" could not be added as X-Axis below profile plots, for some SWMM network features.
SWMM Date and times from time series relative time, were wrongly interpreted in the simulation if they were typed in with values higher than 1 day.
SWMM The "Default time step for new rows" in the "Time series" editor did not work properly.
SWMM The layer type "Catchments" was missing from the list of target layers, in the map's toolbar.
Water Distribution An unexpected error was sometimes obtained when loading some .dat files in the "Measurement stations" editor, due to a non-recognized format.
Water Distribution The import of EPANET .inp files sometimes failed with missing error descriptions.
Water Distribution Start date and End date could not be specified for special days in patterns.
Water Distribution The relative viscosity was wrongly given a unit of m
Water Distribution Sustainability Analysis sometimes failed to report empty or full tanks.
Water Distribution Option "Report raw results" did not work.
Water Distribution With EPANET 2.2 engine, wrong demand value was considered inthe fire flow analysis with the method "Pressure for flow" and in the flushing analysis.
Water Distribution An unexpected validation error about the input string's length was returned when selecting "Link Flow" (absolute)" as result item in the "Plots and statistics" editor.
Water Distribution Demand statistics was not taking into account the value of a demand multiplier if entered in the Multiple demands editor.
Water Distribution Im Editor Pumpen war bei drehzahlgeregelten Pumpen (mit Sollniveau im Pumpensumpf) die minimale Kennlinie ausgegraut und konnte nur im Tabellenbereich bearbeitet werden.
MIKE 1D engine Added support for decimal entry of UHM curve number values.
MIKE 1D engine Fixed error causing failure of LTS job list.
MIKE 1D engine Fixed scripting error in which res1D file not released by MIKE 1D controller.
MIKE 1D engine Fixed error in display of collection system slope in html summary.
MIKE 1D engine Corrected data type expected for sensor type "ActionActiveTime".
MIKE 1D engine Added more informative error message to users attempting to obtain LTS results for "weirs out of system" for setups with internal weirs only.
MIKE 1D engine Added support for "Close" and "Open" actions for valves in RTC setups.
MIKE 1D engine Assed onfprmative error message for setups with duplicate branch definitins.
MIKE 1D engine Added informative error message for setups with time series missing continuously increasing time series values.
MIKE 1D engine Corrected unhandled exception occurring when importing setup from MIKE HYDRO River.
MIKE 1D engine Corrected saving error occurring when results saving period is user-defined.
MIKE 1D engine Disabeld unit conversion to standard units before input to control module.
Couplings engine Fixed error in which couplings engine did not close properly after an error during initialisation.
MIKE 1D engine Made change to order of calculations to enable "SaveFullRunningDischarge" feature.
Couplings engine Fixed formatting error in html summary for coupled simulations.
Couplings engine Added informative error message when node coupled to 2D model located outside 2D domain.
mikeplus/setup/installation_2022_neuin2022.txt · Zuletzt geändert: 2022/08/04 12:07 von thomas