Benutzer-Werkzeuge
mikeurban:setup:installation_2019_neuin2019
Neu in Release 2019 Update 1
| Modul/Typ | Neues Feature/Fehler | Status |
|---|---|---|
| General | MIKE URBAN is updated to ArcGIS 10.7 | New Feature |
| General | MIKE URBAN updated to support SWMM5.1.013 | New Feature |
| MIKE 1D | MIKE 1D gridded rain, dfs2 orientation in degrees used as radians | Fixed |
| MIKE 1D does not read BRANCH_MIN_H_REL and BRANCH_MIN_H_ABS from dhiapp.ini | Fixed | |
| Volume available for pumping includes discharge from connected structures | Fixed | |
| Runtime stop criterion type "Filling degree" does not work with weirs/orifices/pumps in MIKE 1D | Fixed | |
| MIKE 1D ignores max-min timestep parameter in the joblist file of LTS calculation | Fixed | |
| Model Manager | Simplification Wizard does not visualize new demand allocation connection lines correctly | Fixed |
| Remove multiple results at one click in MIKE URBAN Longitudinal Profiles | Fixed | |
| Model Manager (EPANET) | Simplification Wizard, demands not moved downstream when there are two or more demands connected to a junction. | Fixed |
| CS-Pipe Flow | Suffix “CatchmentDischarge” is added to the catchment MUID disabling MIKE1D from reading the information in Boundary Conditions | Fixed |
| Model Manager (SWMM5) | Example1 cannot complete simulation with latest SWMM5 engine version | Fixed |
| Crash when trying to browse a file to import in a specific combination in the Import / Export wizard | Fixed | |
| Exception error when trying to import from specific inp file | Fixed | |
| Catchment Slope and Length: Exception error when clicking No in the Warning dialog | Fixed | |
| Model Manager | Can't load specific MIKE 1D rainfall runoff result file | Fixed |
| Path for Long profile is not fully controllable and wrong path is loaded | Fixed | |
| MU DFS2 support does not work with ArcGIS 10.6.1 | Fixed | |
| Model Manager (EPANET) | Demand Statistic dialog does not have copy/paste options | Fixed |
| Model Manager (MOUSE/MIKE1D) | Curves and Relations Dialog, The third column 'As' is not hidden, appears in all curves that should only have two columns | Fixed |
| CS-Pipe Flow (MIKE 1D) | MIKE 1D merges the catchment ID and the linked boundary condition type into a single non existing MUID when aiming to run the RDI simulation - causing the simulation to stop | Fixed |
| Cannot derive some results from MIKE 1D network calculation results *.res1d | Fixed | |
| Model Manager | MU Project Check Tool does not check for duplicate node MUIDs | Fixed |
| CS-Pipe Flow | Error that MIKE URBAN loads a MIKE 1D result file as soon as a simulation is started, if the previous result file is stored in the same folder as the setup | Fixed |
| Model Manager (EPANET) | PID Control dialog - attributes missing in the "Tools / Customize / Custom Units", mw_PID | Fixed |
| Model Manager (MIKE1D) | Problems with MOUSE engine after upgrading a model from MIKE URBAN 2016 to MIKE URBAN 2017 | Fixed |
| Model Manager | Problem with SWQ Editor functionality with linking to specified Q-H relation specified in GUI | Fixed |
| CS-Pipe Flow | MIKE URBAN - UHM model result incorrect if simulation time shorter than lag time | Fixed |
| Model Manager (EPANET) | Option for user defined prefix for MUIDs when adding new features | Fixed |
| Model Manager (SWMM5) | Export of transect X and Z values are swapped | Fixed |
| CS-Pipe Flow (MIKE 1D, LTS) | MIKE 1D LTS: including AD statistics [Discharge_Load_Out] is ommitted from ERF file | Fixed |
| CS-Pipe Flow (MIKE 1D, LTS) | MIKE 1D LTS: statistics for AD components not related to event definition | Fixed |
| CS-Pipe Flow (MIKE1D) | MIKE 1D truncates RTCFunction.TSConnection1 | Fixed |
| mdb template (Primary) should be exported to gdb template. | Fixed | |
| Model Manager | Option for user defined prefix for MUIDS when adding new features. | Fixed |
| Model Manager (SWMM5) | Problem with loading result items | Fixed |
| Model Manager (EPANET) | The greyed out field beside diameter displaying "diameter - diameter - wall thickness" should be "diameter = diameter – 2 * wall thickness". | Fixed |
| Model Manager (2D Flood) | Changes to the SimulationID does not change the result filename for the .dfs2 in flood simulation causing overwrite of existing result files | Fixed |
| Generate Fish Extent causes MIKE URBAN crash, if decimal separator is set to comma and not dot | Fixed | |
| Changing the Node ID does not cascade to changing the Node ID for the coupled cells | Fixed | |
| Model Manager | Update of catchment parameters fails (msm_HModA) in the Import / Export tools | Fixed |
| Model Manager (2D FLOOD) | "Node Water Level" result list for MIKE 1D flood results viewed in MIKE URBAN incorrectly offers both node and M21 node levels | Fixed |
| Model Manager | Export to ISYBAU format is not working | Fixed |
| Model Manager | The volume graph for basin storage should be drawn based on calculating many points covering the range of the specified table | Fixed |
| Model Manager (CS-Pipe Flow) | MIKE URBAN and ECOLAB - editing built-in constants. The editor field "Global value" (attribute msm_EcolabCoeffvalue) should be disabled if msm_EcolabBuildInID <> -1, which means the values come directly from ECO Lab | Fixed |
| Model Manager (CS-Pipe Flow) | Improvement of the syntax in the LTS statistics result file ERF | Fixed |
| Problem with MIKE1D engine writing LTS result file ERF in binary format | Fixed | |
| Model Manager (SWMM5) | SWMM5 should support routing steps in decimals | Fixed |
| Model Manager (CS-Pollution Transport) | Catchment processing SWQ concentrations: the tool does not work for multiple components | Fixed |
| Model Manager | After MIKE 1D simulations, result files are not auto loaded | Fixed |
| Model Manager (2D FLOOD) | Error in 2D OverlandFlow Example with reading Band_1 in DEM.dfs2 | Fixed |
| Model Manager (CS-Pipe Flow) | Error in MIKE1D engine requiring a Q-H relation table having at least three entries specified – two entries is enough | Fixed |
Neu in MIKE URBAN Version 2019
| Modul/Typ | Neues Feature/Fehler | Status |
|---|---|---|
| Import/Export | Export to ISYBAU format is not working | New Feature |
| Model Manager | mdb template (Primary) should be exported to gdb template. | Fixed |
| MU DFS2 support does not work with ArcGIS 10.6.1 | Fixed | |
| Option for user defined prefix for MUIDS when adding new features. | New Feature | |
| Path for Long profile is not fully controllable and wrong path is loaded | Fixed | |
| Remove multiple results at one click in MIKE URBAN Longitudinal Profiles | Fixed | |
| Model Manager Tools | Simplification Wizard, demands not moved downstream when there are two or more demands connected to a junction. | Fixed |
| Simplification Wizard does not visualize new demand allocation connection lines correctly | Fixed | |
| MU Project Check Tool does not check for duplicate node MUIDs | Fixed | |
| Collection System | Curves and Relations Dialog, The third column 'As' is not hidden, appears in all curves that should only have two columns | Fixed |
| MIKE URBAN - UHM model result incorrect if simulation time shorter than lag time | Fixed | |
| Problems with MOUSE engine after upgrading a model from MIKE URBAN 2016 to MIKE URBAN 2017 | Fixed | |
| The volume graph for basin storage should be drawn based on calculating many points covering the range of the specified table | Fixed | |
| Update of catchment parameters fails (msm_HModA) in the Import / Export tools | Fixed | |
| Problem with SWQ Editor functionality with linking to specified Q-H relation specified in GUI | Fixed | |
| Catchment processing SWQ concentrations: the tool does not work for multiple components | Fixed | |
| MIKE URBAN and ECOLAB - editing built-in constants. The editor field "Global value" (attribute msm_EcolabCoeffvalue) should be disabled if msm_EcolabBuildInID <> -1, which means the values come directly from ECO Lab | Fixed | |
| MIKE 1D | Suffix “CatchmentDischarge” is added to the catchment MUID disabling MIKE1D from reading the information in Boundary Conditions | Fixed |
| After MIKE 1D simulations, result files are not auto loaded | Fixed | |
| Can't load specific MIKE 1D rainfall runoff result file | Fixed | |
| MIKE 1D merges the catchment ID and the linked boundary condition type into a single non existing MUID when aiming to run the RDI simulation - causing the simulation to stop | Fixed | |
| Cannot derive some results from MIKE 1D network calculation results *.res1d | Fixed | |
| Error in MIKE1D engine requiring a Q-H relation table having at least three entries specified – two entries is enough | Fixed | |
| Error that MIKE URBAN loads a MIKE 1D result file as soon as a simulation is started, if the previous result file is stored in the same folder as the setup | Fixed | |
| MIKE 1D truncates RTCFunction.TSConnection1 | Fixed | |
| LTS | Improvement of the syntax in the LTS statistics result file ERF | Fixed |
| MIKE 1D LTS | Including AD statistics [Discharge_Load_Out] is ommitted from ERF file | Fixed |
| Problem with MIKE1D engine writing LTS result file ERF in binary format | Fixed | |
| Statistics for AD components not related to event definition | Fixed | |
| Water Distribution | PID Control dialog - attributes missing in the "Tools | Customize | Custom Units", mw_PID | Fixed |
| The greyed out field beside diameter displaying "diameter - diameter - wall thickness" should be "diameter = diameter – 2 * wall thickness". | Fixed | |
| EPANET | Demand Statistic dialog does not have copy/paste options | Fixed |
| Option for user defined prefix for MUIDs when adding new features | Fixed | |
| SWMM5 | SWMM5 should support routing steps in decimals | Fixed |
| Catchment Slope and Length: Exception error when clicking No in the Warning dialog | Fixed | |
| Crash when trying to browse a file to import in a specific combination in the Import / Export wizard | Fixed | |
| Example1 cannot complete simulation with latest SWMM5 engine version | Fixed | |
| Exception error when trying to import from specific inp file | Fixed | |
| Export of transect X and Z values are swapped | Fixed | |
| Problem with loading result items | Fixed | |
| 2D FLOOD | "Node Water Level" result list for MIKE 1D flood results viewed in MIKE URBAN incorrectly offers both node and M21 node levels | Fixed |
| Changes to the SimulationID does not change the result filename for the .dfs2 in flood simulation causing overwrite of existing result files | Fixed | |
| Changing the Node ID does not cascade to changing the Node ID for the coupled cells | Fixed | |
| Error in 2D OverlandFlow Example with reading Band_1 in DEM.dfs2 | Fixed | |
| Generate Fish Extent causes MIKE URBAN crash, if decimal separator is set to comma and not dot | Fixed |
mikeurban/setup/installation_2019_neuin2019.txt · Zuletzt geändert: 2019/06/20 13:17 von thomask
